Advanced fleet management software integrating fuel monitoring sensors for improved vehicle performance."

ISOLATION POWER STABILIZER

DESCRIPTION

  • Four independent output circuits (Class B or A) for notification and auxiliary power.
  • Current protection with 3A per circuit.​
  • Seismic compliance with a 1.5 importance factor​.
  • Battery support up to 65 ampere-hours.​
  • Supervision for battery charging in safety-critical applications.
SKU: su1-1 Category:

Description

PURPOSE

FOR FUEL MONITORING AND FUEL CONSUMPTION

Isolation power stabilizer BPS6 is applied for power supply system of a trip set of information and control system. Stabilizer provide galvanic decoupling of power circuits and is applied in case when necessary to provide system operation in normal power cut off.

SENSOR INSTALLATION AND CONNECTION

Install the BPS6 stabilizer in a dry, ventilated area. Switch off the main power supply, connect input wires to the stabilizer’s terminals, output wires to the equipment, and ensure proper grounding. Securely mount or place the unit, then turn on the power. Test input and output voltages with a multimeter. Refer to the manual or seek professional help if required.

Additional information

Voltage Output

24 Vdc

Current Rating

6.5 Amps

Battery Compatibility

Supports up to 24 Ah for MNEC, 65 Ah for access control

Output Circuits

Four independent Class B circuits, configurable to Class A

Overcurrent Protection

Automatically restoring overcurrent protection

Ground Fault Detection

Included

AC Fail Relay

Yes

Seismic Rating

Designed for seismic requirements (Importance Factor 1.5)

Dimensions

17 × 8 × 5 inches

Reviews

There are no reviews yet.

Be the first to review “ISOLATION POWER STABILIZER”